Come to us for light, small, narrow and difficult leaf springs, from testing to mass production!

Come to us for fine, thin, small, narrow and complex plate springs when you have no time to spare between testing and mass production!

We make everything from plates to three-dimensional objects. We perform cold forging on shapes that aren't possible with cutting!

If you have a die but are having trouble with press stamping, then consult with us.

We can offer a wide range of round-shaped products! Our company can do both curling and drawing! We'll propose the optimal production method!

SUS304CSP-1/2H Complex-Shaped Parts with Multi-Process Progressive Stamping

C5191 t0.15 Leaf spring with - Circularity 0.03

C7521R-1/2H t:0.1mm Non-Circular Deep Drawing Processing

C2680R-H Nickel-Plated Leaf Spring Reinforcement Plate

C1720R-1/2H t0.2 Leaf Spring Processing

Leaf Spring with Two Contact Points (Micro & Complex Bending)

SUS304CSP-H Low-Load Leaf Spring (t=50μm)

Leaf Spring – Concentricity & Coaxiality Within 0.03, Complex Shape

Leaf Spring for Socket Contact - Small-Diameter Curling Processing

C2680R-1/2H Small-Diameter Deep Drawing (Progressive Processing)

C1720R-H Sliding Spring (Cylindrical Shape)

C1100R-1/2H t0.2mm Connector Terminals

C2680R-1/2H t0.2 φ1.2 Deep Drawing Process

C1720R-HM Small-Diameter Curling Processing (Progressive Stamping, Continuous Winding)

Introducing Load Testing / Load Measurement Services for Leaf Springs