Language: 日本語 | English
Language: 日本語 | English
A progressive die with a total of 25 processes, die length of 700mm, and a 150-ton press machine.
Material: SUS304CSP-1/2H (spring steel)
Thickness: t0.3mm
Processing elements included: Blanking, punching (round, square), right-angle bending, hemming, drawing, etc.
The more bending points there are, the exponentially more difficult it becomes to maintain overall precision.
We specialize in precision-demanding stamped parts with a high number of processes, from prototyping to mass production.
For more examples of complex-shaped products, click here:
https://www.kyowa-hearts.com/press/
☆ Frequently Asked Questions
https://www.kyowa-hearts.com/faq/
☆ Equipment Information
https://www.kyowa-hearts.com/setsubi/
☆ Contact & Process from Prototyping to Mass Production
https://www.kyowa-hearts.com/flow/
＜Contact Information＞
Kyowa Hearts Co., Ltd. – Rumi Sakamoto
■ Address: 1-5-1 Takata-Nishi, Kohoku-ku, Yokohama, Kanagawa, Japan
■TEL:045-593-6116 FAX:045-593-6121
■Official website: https://www.kyowa-hearts.com
Material: Phosphor Bronze C5210R-1/2H, t0.15mm
Outer Diameter: φ2.3mm
Circularity: 0.03mm
At the customer's request, we designed a shape that secures the part inside the hole of the mating component.
For more examples of leaf spring products, click here:
https://www.kyowa-hearts.com/spling/
☆ Frequently Asked Questions
https://www.kyowa-hearts.com/faq/
☆ Equipment Information
https://www.kyowa-hearts.com/setsubi/
☆ Contact & Process from Prototyping to Mass Production
https://www.kyowa-hearts.com/flow/
＜Contact Information＞
Kyowa Hearts Co., Ltd. – Rumi Sakamoto
■ Address: 1-5-1 Takata-Nishi, Kohoku-ku, Yokohama, Kanagawa, Japan
■ TEL: 045-593-6116 FAX: 045-593-6121
■ Official Website: https://www.kyowa-hearts.com
Product Name: Sound Port (Hearing Aid Component)
Material: Phosphor Bronze C7521R-1/2H, t:0.1mm
Drawn Outer Diameter: Φ1.4mm
Product Dimensions: 3.2mm × 3.2mm
Total Height: 1.5mm
Key Points in Die Design:
Due to the non-circular drawn shape, innovative process design was necessary.
At Kyowa Hearts, we take on the challenge of new manufacturing technologies, including progressive deep drawing. This enables us to provide deep drawing as an alternative to conventional curling techniques for components requiring higher strength, offering customers greater flexibility in design and development.
We take full responsibility for the entire production process—from die design to final product—ensuring top-level precision and durability. With all operations, from prototyping to die design, manufacturing, and mass production, carried out at our Yokohama factory, we can respond flexibly and quickly to customer needs. Feel free to contact us.
For more deep drawing product examples, click here:
https://www.kyowa-hearts.com/sibori/
☆ Frequently Asked Questions
https://www.kyowa-hearts.com/faq/
☆ Equipment Information
https://www.kyowa-hearts.com/setsubi/
☆ Contact & Process from Prototyping to Mass Production
https://www.kyowa-hearts.com/flow/
＜Contact Information＞
Kyowa Hearts Co., Ltd. – Rumi Sakamoto
■ Address: 1-5-1 Takata-Nishi, Kohoku-ku, Yokohama, Kanagawa, Japan
■ TEL: 045-593-6116 FAX: 045-593-6121
■ Official Website: https://www.kyowa-hearts.com
Material: SUS304CSP
Thickness: t0.15mm
Processing Method: Press processing using progressive dies
It is possible to incorporate various processing elements into a small shape.
This product is a leaf spring with two contact points in different directions within a compact space.
When considering parts for weight reduction, multifunctionality, etc., please provide details regarding space constraints and required functions. We can consider the shape and make proposals.
For more examples of leaf spring products, click here:
https://www.kyowa-hearts.com/spling/
☆ Frequently Asked Questions
https://www.kyowa-hearts.com/faq/
☆ Equipment Information
https://www.kyowa-hearts.com/setsubi/
☆ Contact & Process from Prototyping to Mass Production
https://www.kyowa-hearts.com/flow/
＜Contact Information＞
Kyowa Hearts Co., Ltd. – Rumi Sakamoto
■ Address: 1-5-1 Takata-Nishi, Kohoku-ku, Yokohama, Kanagawa, Japan
■ TEL: 045-593-6116 FAX: 045-593-6121
■ Official Website: https://www.kyowa-hearts.com
【Product Specifications】
Thickness: 0.05mm
Material: Stainless Steel
Max Width: 2mm
Total Length: 3.6mm
Height: 0.7mm
Processing Method: Press processing using progressive dies
This is a low-load leaf spring designed to minimize applied force.
The die clearance is 2μm, which requires manual fine adjustments beyond the precision of machining tools.
Maintaining quality with minimal burrs is the key to press processing.
For more examples of leaf spring products, click here:
https://www.kyowa-hearts.com/spling/
☆ Frequently Asked Questions
https://www.kyowa-hearts.com/faq/
☆ Equipment Information
https://www.kyowa-hearts.com/setsubi/
☆ Contact & Process from Prototyping to Mass Production
https://www.kyowa-hearts.com/flow/
＜Contact Information＞
Kyowa Hearts Co., Ltd. – Rumi Sakamoto
■ Address: 1-5-1 Takata-Nishi, Kohoku-ku, Yokohama, Kanagawa, Japan
■ TEL: 045-593-6116 FAX: 045-593-6121
■ Official Website: https://www.kyowa-hearts.com
【Product Specifications】
Material: Phosphor Bronze
Thickness: 0.2
Shape:
φ1.9 (1 location)
φ3.7 (3 locations)
Total Length: 14
Application: Antenna Element
Precision in Concentricity & Coaxiality! Complex-Shaped Antenna Element
We successfully achieved concentricity and coaxiality within 0.03 for four interconnected circles of varying diameters, despite their unstable connections.
For more examples of leaf spring products, click here:
https://www.kyowa-hearts.com/spling/
☆ Frequently Asked Questions
https://www.kyowa-hearts.com/faq/
☆ Equipment Information
https://www.kyowa-hearts.com/setsubi/
☆ Contact & Process from Prototyping to Mass Production
https://www.kyowa-hearts.com/flow/
＜Contact Information＞
Kyowa Hearts Co., Ltd. – Rumi Sakamoto
■ Address: 1-5-1 Takata-Nishi, Kohoku-ku, Yokohama, Kanagawa, Japan
■ TEL: 045-593-6116 FAX: 045-593-6121
■ Official Website: https://www.kyowa-hearts.com
【Product Specifications】
Product Name: Leaf Spring for Socket Contact
Material: C5210R-H (Phosphor Bronze)
Thickness: t0.1
Total Length: 4
Inner Diameter:
Both Outer Sides: φ1.3mm
Center Section: φ0.8mm
Slit Dimensions: Width 0.3 × 6 slots
Roundness Accuracy: Within 0.05
Processing Method: Progressive Curling Processing
Key Explanation
Curling processing refers to the technique of rolling a flat sheet into a cylindrical shape.
The product shown in the image is a tsuzumi (drum) shape, where the center diameter in the length direction is larger than the diameters at both ends. Additionally, it is also possible to process a tawara (barrel) shape, which has a similar structure.
We can handle various spring materials, including phosphor bronze, beryllium copper, and stainless steel (SUS).
We have also successfully developed even smaller-sized components.
For more examples of leaf spring products, click here:
https://www.kyowa-hearts.com/spling/
☆ Frequently Asked Questions
https://www.kyowa-hearts.com/faq/
☆ Equipment Information
https://www.kyowa-hearts.com/setsubi/
☆ Contact & Process from Prototyping to Mass Production
https://www.kyowa-hearts.com/flow/
＜Contact Information＞
Kyowa Hearts Co., Ltd. – Rumi Sakamoto
■ Address: 1-5-1 Takata-Nishi, Kohoku-ku, Yokohama, Kanagawa, Japan
■ TEL: 045-593-6116 FAX: 045-593-6121
■ Official Website: https://www.kyowa-hearts.com
【Product Specifications】
Material: Brass C2680R-1/2H
Thickness: 0.64mm
Height: 4.5mm
Drawn Outer Diameter: φ4.6mm
Necked Section:
Outer Diameter: φ1.6mm
Inner Diameter: φ0.7mm
Processing Method: Progressive Deep Drawing
Key Explanation
Deep drawing is a forming process where pressure is applied to a sheet material to create a seamless, three-dimensional shape. This method is ideal for applications requiring airtightness and high strength.
Creating a necked section in the middle of the product presents a high level of difficulty.
Progressive deep drawing is well-suited for small, high-precision products. However, successful execution relies on experience and know-how that cannot be fully quantified.
For more examples of deep-drawn products, click here:
https://www.kyowa-hearts.com/sibori/
☆ Frequently Asked Questions
https://www.kyowa-hearts.com/faq/
☆ Equipment Information
https://www.kyowa-hearts.com/setsubi/
☆ Contact & Process from Prototyping to Mass Production
https://www.kyowa-hearts.com/flow/
＜Contact Information＞
Kyowa Hearts Co., Ltd. – Rumi Sakamoto
■ Address: 1-5-1 Takata-Nishi, Kohoku-ku, Yokohama, Kanagawa, Japan
■ TEL: 045-593-6116 FAX: 045-593-6121
■ Official Website: https://www.kyowa-hearts.com
This is an irregular-shaped deep drawing process for aluminum.
Approximate dimensions: 8.5mm × 34mm, depth 80mm, thickness 0.45mm.
The photo shows deep drawing of pure titanium type 1, Φ6.3 × 40.
We also have experience processing the same shape using beta-type titanium alloy.
