Language: 日本語 | English
Language: 日本語 | English
When manufacturing round shapes with press stamping there are two ways: curling and drawing.
Either method is available at our company.
We'll propose the optimal method keeping in mind the purpose for using the product, the required strength, the lead time allowed, etc.
A progressive die with a total of 25 processes, die length of 700mm, and a 150-ton press machine.
Material: SUS304CSP-1/2H (spring steel)
Thickness: t0.3mm
Processing elements included: Blanking, punching (round, square), right-angle bending, hemming, drawing, etc.
The more bending points there are, the exponentially more difficult it becomes to maintain overall precision.
We specialize in precision-demanding stamped parts with a high number of processes, from prototyping to mass production.
For more examples of complex-shaped products, click here:
https://www.kyowa-hearts.com/press/
☆ Frequently Asked Questions
https://www.kyowa-hearts.com/faq/
☆ Equipment Information
https://www.kyowa-hearts.com/setsubi/
☆ Contact & Process from Prototyping to Mass Production
https://www.kyowa-hearts.com/flow/
＜Contact Information＞
Kyowa Hearts Co., Ltd. – Rumi Sakamoto
■ Address: 1-5-1 Takata-Nishi, Kohoku-ku, Yokohama, Kanagawa, Japan
■TEL:045-593-6116 FAX:045-593-6121
■Official website: https://www.kyowa-hearts.com
This part, previously assembled using a combination of resin and machined components, has been integrally formed using the reverse drawing process.
The conventional product (resin + machined parts) had issues with airtightness, which were resolved by integrating the parts into a single piece. Additionally, this reduced the assembly workload.
Approximate dimensions: Outer drawing φ18.2mm, inner drawing φ9.9mm, total length 19mm.
We successfully achieved cost reduction by producing a component, which previously required post-press cutting to create 0.35mm-deep grooves on the inner walls (0.7mm thickness) of a square-drawn part, using simultaneous press processing at 8 locations.
Additionally, the outer surface shows almost no traces of the inner groove processing, making it suitable for use as an exterior component.
Approximate dimensions: 45mm × 45mm, height 7mm
Material: Brass (C2680 1/4H)
We provide a round-tip product by applying splitting (Warisaki) processing technology.
・To change the material shape from flat metal to round metal!
・To put the round shaped part to the flat metal directly!
We can cope with a specially ordered product if the diameter of the round shape is within the dimension which can be put on the press.
We constantly handle with the extending of the materials.
ONLY ONE Processing Technology [Warizaki Method]
Splits a plate from three directions.
ONLY ONE Processing Technology [Split]
Splits a plate with a thickness of 25mm.
We have experience in the design and manufacturing of outboard motors (brazing), agricultural machinery (various frames and operational mechanism development), and construction materials.
