Language: 日本語 | English
Language: 日本語 | English
【Product Specifications】
Thickness: 0.05mm
Material: Stainless Steel
Max Width: 2mm
Total Length: 3.6mm
Height: 0.7mm
Processing Method: Press processing using progressive dies
This is a low-load leaf spring designed to minimize applied force.
The die clearance is 2μm, which requires manual fine adjustments beyond the precision of machining tools.
Maintaining quality with minimal burrs is the key to press processing.
For more examples of leaf spring products, click here:
https://www.kyowa-hearts.com/spling/
☆ Frequently Asked Questions
https://www.kyowa-hearts.com/faq/
☆ Equipment Information
https://www.kyowa-hearts.com/setsubi/
☆ Contact & Process from Prototyping to Mass Production
https://www.kyowa-hearts.com/flow/
＜Contact Information＞
Kyowa Hearts Co., Ltd. – Rumi Sakamoto
■ Address: 1-5-1 Takata-Nishi, Kohoku-ku, Yokohama, Kanagawa, Japan
■ TEL: 045-593-6116 FAX: 045-593-6121
■ Official Website: https://www.kyowa-hearts.com
Introducing Load Testing / Load Measurement Services for Leaf Springs
At Kyowa Hearts, we specialize in the processing of leaf springs.
There are several key points in quality control for leaf springs, but load is one of the most critical factors.
To achieve sufficient load capacity, fine adjustments to the product shape and careful selection of materials are essential.
We have multiple load measurement machines in-house, allowing us to collect data during the prototyping stage to assist in selecting the optimal material and sheet thickness.
Additionally, during mass production, we can measure the load of leaf springs in real time and make fine adjustments to ensure product quality.
Even if you don’t have design drawings, no problem! Reverse engineering is also available.
Feel free to contact us anytime!
☆ Frequently Asked Questions:
https://www.kyowa-hearts.com/faq/
☆Equipment Information:
https://www.kyowa-hearts.com/setsubi/
☆From Inquiry to Prototyping & Mass Production:
https://www.kyowa-hearts.com/flow/
Contact Information
Kyowa Hearts Co., Ltd. – Rumi Sakamoto
Address: 1-5-1 Takata Nishi, Kohoku-ku, Yokohama, Kanagawa, Japan
TEL: 045-593-6116
FAX: 045-593-6121
Official Website: https://www.kyowa-hearts.com
We provide a round-tip product by applying splitting (Warisaki) processing technology.
・To change the material shape from flat metal to round metal!
・To put the round shaped part to the flat metal directly!
We can cope with a specially ordered product if the diameter of the round shape is within the dimension which can be put on the press.
We constantly handle with the extending of the materials.
